Mediumweight interfacing for use in small parts of clothing such as collars, cuffs, fronts of jackets and coats. Suitable for light- to mediumweight fabrics. • Retains its shape • Soft, comfortable texture • Wash up to 40°C   1. As a non-woven interfacing, you can place pattern pieces in any direction. 2. Cut out the pattern pieces required. Trim interfacing down all round by 3mm (1/8″). 3. Place the interfacing on the reverse side of the fabric with the coated side facing down, cover with a press cloth. Press with medium to hot steam iron for approx 10-12 seconds. Do not push the iron. Raise and lower to fuse all areas. 4. After fixing, lay the pieces flat to cool down for around 30 minutes to allow the bond to stabilise. N.B. Always test the product on a scrap of your project’s fabric following steps 2-4 above.